Need to know Z steps!

Post Reply
comlog64
Posts: 1
Joined: Wed Jul 28, 2021 4:01 am

Need to know Z steps!

Post by comlog64 » Thu Jul 29, 2021 6:14 am

I thought my z-axis motor died, and after some time diagnosing, I found that my E and Z steps/mm had both been zeroed.
I had recently done Estep calibration, so I remember what that value was, but I'm not sure of what the Z-steps/mm should be.
A10T
Other than Octoprint, its all stock.
What should the Z-steps/mm be???

TIA

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Need to know Z steps!

Post by Admin » Tue Aug 03, 2021 3:17 pm

Hello, Z: 400
E:395

Post Reply