Geeetech A10 with 3D Touch?

Post Reply
stud22
Posts: 2
Joined: Wed Apr 28, 2021 6:10 pm

Geeetech A10 with 3D Touch?

Post by stud22 » Fri Jun 11, 2021 12:44 pm

Hello there, everyone! I'm trying to instal a 3D Touch on my Geeetech a10, but I'm not sure how to do it because I don't understand the circuit board. I'm not sure where I'm supposed to plug the 3 and 2 pin connectors in.

All of the images I've found online show the new main board (which has a specific area for the 3D Touch), not the one I have.

Also, there's a plug called "PWM BLO," which no one seems to know what it's for.
192.168.8.1
192.168.100.1
https://router-net.com/pt

YounG9300
Posts: 2
Joined: Wed Nov 11, 2020 11:19 pm

Re: Geeetech A10 with 3D Touch?

Post by YounG9300 » Sat Jul 03, 2021 8:45 pm

Hello,
If not solved yet, you may find useful information here :
- Tutuorial, firmware upgrade and connection pictures

https://www.geeetech.com/download.html?download_id=49

Hope to be helpful,
best regards.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Geeetech A10 with 3D Touch?

Post by Admin » Mon Jul 05, 2021 4:43 pm

Hello, as the enthusiastic user above said, 3dtouch only needs to be connected to the adapter board, not needed and cannot be connected to the motherboard.

Post Reply