A10T leaking PLA through heater element holes

Post Reply
jmd5757
Posts: 1
Joined: Thu Jun 03, 2021 6:20 pm

A10T leaking PLA through heater element holes

Post by jmd5757 » Thu Jun 03, 2021 6:39 pm

Hi all, I have recently been getting Blops of PLA on my prints and found the PLA leaking out of the heater element holes, this is not some thing have come across before, can any one advise.

sneazzy95
Posts: 9
Joined: Sat Dec 21, 2019 12:13 am

Re: A10T leaking PLA through heater element holes

Post by sneazzy95 » Mon Jun 07, 2021 6:21 am

Hey, I don't get it. Could you give more details about your issue please?

Mini Militia App Lock
Last edited by sneazzy95 on Tue Jul 05, 2022 7:06 am, edited 6 times in total.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: A10T leaking PLA through heater element holes

Post by Admin » Mon Jun 07, 2021 4:12 pm

Hello, did you mean that your hotend leaked? Please try to tighten the nozzle. It may be that the nozzle is loose.
If it is a defect on the heating block that cannot be repaired, please contact geeetech and they will replace you with new parts.

Post Reply