A10m Extruder blocked

Post Reply
BeanCounter
Posts: 1
Joined: Sat Apr 11, 2020 4:20 pm

A10m Extruder blocked

Post by BeanCounter » Sat Apr 11, 2020 4:44 pm

My A10M has had an ABS filament snap off just below level of extrusion head - and upon further inspection it looks like there may be a second filament piece jammed in well down. Tried heating to 240 and pushing through - doesn't help. Any ideas on how to get filament out appreciated - photo of issue attached
IMG_1592[1].JPG
IMG_1592[1].JPG (188.16 KiB) Viewed 4442 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10m Extruder blocked

Post by William » Sat Apr 11, 2020 5:03 pm

Hi, You can try heating the temperature to 250,
Use the cleaning tool to see if you can eject supplies.
If it cannot be pushed out, the hot end needs to be replaced.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ArmandBaker
Posts: 1
Joined: Wed Aug 25, 2021 8:17 pm

Re: A10m Extruder blocked

Post by ArmandBaker » Sat Aug 28, 2021 8:36 pm

Assuming you need to partake in the best Buffet near me on the planet Las Vegas is the spot to be. Here you can discover some of all that everything you can eat café which likewise give 24 hour passes to permit you to enjoy all the food you might conceivably appreciate.

Post Reply