3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by Wolle82 » Tue Oct 02, 2018 5:53 am

Hi there ...

Mainboard: GT2560 Rev B
Printer: Geeetech A10
Sensor: BLTouch

after I connected the autoleveling sensor it seams to look quiet good. It starts its selftest and there is no alert blinking. All okay so far. I did the changes to the firmware to activate the BLTouch (ABL). But when I start testing it doesn't do anything. The GCODE commands end with "OK" in the log, but nothing happens. I connected the sensor this way: viewtopic.php?f=91&t=61576&start=10.

"M280 P0 S10" for example... nothing happen.

Any ideas? May you help me please?

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by Wolle82 » Sat Oct 06, 2018 4:05 am

No ideas?

RepMike
Posts: 18
Joined: Tue Jul 04, 2017 6:06 am

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by RepMike » Sat Oct 06, 2018 4:45 am

I hope you get a reply from Geeetech soon. Please note that due to the Chinese National day, many companies in China are on holiday for the entire week. Maybe it's also the case with GT; I don't know though. I just wanted to encourage you to be patient.

zonalimitatore
Posts: 78
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by zonalimitatore » Thu Dec 06, 2018 10:05 pm

Any news?

Rainerw
Posts: 4
Joined: Sun Oct 07, 2018 2:45 am

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by Rainerw » Fri Dec 07, 2018 1:56 am

Same problem, i dont get this GT2560 RevB work with BLtoch. BLTouch do a self test after turning printer on, and thats it. No control in BLTouch Menu or with Gcode.

I tried this http://www.geeetech.com/forum/viewtopic ... 6&start=10
and https://cdn.thingiverse.com/assets/05/0 ... to_A10.pdf

zonalimitatore
Posts: 78
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by zonalimitatore » Fri Dec 07, 2018 2:28 am

Fantastic....i've order one other day :evil:

Rainerw
Posts: 4
Joined: Sun Oct 07, 2018 2:45 am

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by Rainerw » Fri Dec 07, 2018 2:58 am

zonalimitatore wrote:
Fri Dec 07, 2018 2:28 am
Fantastic....i've order one other day :evil:
Now you get the GT2560 V3.0 Controller Board

zonalimitatore
Posts: 78
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by zonalimitatore » Fri Dec 07, 2018 4:14 am

Rainerw wrote:
Fri Dec 07, 2018 2:58 am
zonalimitatore wrote:
Fri Dec 07, 2018 2:28 am
Fantastic....i've order one other day :evil:
Now you get the GT2560 V3.0 Controller Board
i've rev b

zonalimitatore
Posts: 78
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by zonalimitatore » Mon Dec 17, 2018 2:28 am

Mount....follow how install,add parameters to firmware,reflash,aaaaaaaand.....not work. No control in menu

Geeeeeeetech....there is a way to make it work or it's lost time?

zonalimitatore
Posts: 78
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: 3DTouch / BLTouch auto leveling sensor GCODE for GT2560 Rev B

Post by zonalimitatore » Mon Dec 17, 2018 2:45 am

I've write my own firmware,and I haven't filament sensor enable. :roll:

Post Reply