MAC

Post Reply
fifati8270@cfcjy.com
Posts: 1
Joined: Sat Aug 14, 2021 10:13 pm

MAC

Post by fifati8270@cfcjy.com » Sat Aug 14, 2021 10:14 pm

MAC

Kasey001
Posts: 4
Joined: Wed Feb 10, 2021 4:55 pm

Re: MAC

Post by Kasey001 » Wed Oct 13, 2021 8:59 pm

The maximum nozzle temperature on the A30T is 250°C. I need around 260°C to print with PA12. Is it possible to modify the software to achieve a higher vidmate maximum.

Post Reply