Me Creator 2 aluminium plate

Post Reply
8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Me Creator 2 aluminium plate

Post by 8ung » Tue Jan 14, 2020 3:08 pm

Hi GEETECH guys
any explanation, why your spare part https://www.geeetech.com/mini-aluminum- ... p-878.html
is shrunken.
My original plate has 180x180mm
IMG_20200114_060356.jpg
IMG_20200114_060356.jpg (173.67 KiB) Viewed 20582 times
IMG_20200114_060326.jpg
IMG_20200114_060326.jpg (183.47 KiB) Viewed 20582 times
thats neccessary because printing volume is 160x160mm
pse for Info
tnx
Last edited by 8ung on Tue Jan 14, 2020 5:59 pm, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Me Creator 2 aluminium plate

Post by William » Tue Jan 14, 2020 4:31 pm

:D Hi,thanks for your feedback.
maybe changed size but not adjusted,
you can print in the range of the hotbed.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Re: Me Creator 2 aluminium plate

Post by 8ung » Tue Jan 14, 2020 5:50 pm

Ah I see there was a Mecreator , without "2", never seen this before :-)
Ok this plate should be for the old modell
But where is the plate for Mecreator 2
Do you have a link William
tnx

8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Re: Me Creator 2 aluminium plate

Post by 8ung » Wed Aug 05, 2020 2:57 am

any hints William ?

VonRueden
Posts: 1
Joined: Wed Jul 21, 2021 12:58 pm

Re: Me Creator 2 aluminium plate

Post by VonRueden » Wed Jul 21, 2021 1:01 pm

I just put an order on eBay for an aluminum build plate for my Replicator2. The build plate that comes with the rep 2 is acrylic. It's tough to level the acrylic plate since its slightly warped. I think it has a minor hump in the center since leveling the front and the back knobs to a paper height distance between the plate and extruder, causes the center of the platform to be too close the the extruder. Has anyone done the aluminum upgrade?



My AARP Medicare

Post Reply