I3 Pro C hotends and hotbed dead
Posted: Sat Apr 18, 2020 1:54 am
Hi. I built my Pro C. All Good but the Z-axis threads are very bad. I can fix this.
Problem is the power to the mosfets. NO POWER at all
Power supply 12v DC OK
Fuses OK
frimware 1.0.05 reflashed OK
thermistors functioning normal
I tried to activate hotends and bed from LCD and CURA - nothing works
NO POWER OUTPUT TO HEATERS
All else good.
I think the board is DOA for the heaters?
Any ideas?
Thanks
Printer: I3 Pro C
board GT2560
CNC experience level: high
Problem is the power to the mosfets. NO POWER at all
Power supply 12v DC OK
Fuses OK
frimware 1.0.05 reflashed OK
thermistors functioning normal
I tried to activate hotends and bed from LCD and CURA - nothing works
NO POWER OUTPUT TO HEATERS
All else good.
I think the board is DOA for the heaters?
Any ideas?
Thanks
Printer: I3 Pro C
board GT2560
CNC experience level: high