Post Reply
Posts: 1
Joined: Mon Jan 13, 2020 4:54 pm


Post by I3procUSER » Mon Jan 13, 2020 4:58 pm

The hotend seems to have smaller dimensions compared to the MK8 hotend. Can you give us the specs for it? Which nozzle I can use and which silicone cover would fit.

On other hotends there is a PTFE Tube, which goes into the nozzle (i3 pro w).

User avatar
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hotend

Post by William » Mon Jan 13, 2020 5:48 pm

Hi, the Nozzle is 0.3mm

The heating block is 7075-T6
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Posts: 1
Joined: Mon Jul 26, 2021 2:50 pm

Re: Hotend

Post by Amelie » Mon Jul 26, 2021 7:37 pm

Thank you for asking this question, I was having the same query regarding a 3D printer because I wanted to get all the information on it as I am giving a UK dissertation help to a student whose dissertation topic is about the impact of 3D printers. I have learned quite a new thing from this page.

Post Reply