Geeetech

Is it possible to get Megatronics working with the Reprapdiscount Full Graphic Smart Controller?
http://www.reprapdiscount.com/home/34-f ... oller.html

I have the adaptor you make to work with your smart controller and they are very similar. It would help a lot if the silkscreen on Megatronics had more info around the headers if only marking PIN1 of any given header.
Difficult to use a pinout when you don't know the pins.

Thanks for any help

Hi,
Yes, it can work with Reprapdiscount Full Graphic Smart Controller. You need to connect them by jumper wires.
Thanks for your suggestion about silkscreen, we'll taking it into consideration.
Have a nice day!

I know megatronics V2.0 is obsolete ...

anyway I got one and a LCD, I spent time to make its working with Repetier last version,
now it works, please forget the smart connector and use your own wires like this : ]