kaktus' guide - fans - however, it was not the end

Post Reply
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

kaktus' guide - fans - however, it was not the end

Post by _kaktus_ » Mon Apr 16, 2018 11:58 pm

Because I am very irritated by the noise of a small hotend fan, I decided to get rid of the noise.
Each time the printer is turned on, this toddler operates at full power. It makes a horrible noise. No matter if it is needed or not.

That's why I do not like him very much. But it's not his fault ;-D

I was so mad at him that I invented a quick effective solution.
I dealt with him using one additional connection.
yes, no joke. By adding one wire I got individual control for this small fan. ;-D

Having knowledge from previous kaktus' guides it was not difficult to do.

I unplugged the cable located near the head cart.
An additional cable connected the fan to the EXT2 socket, pin 6
Of course, we're talking about a fan cable with a GND signal.
[attachment=0]przepis_na_wnetylator.jpg[/attachment]

Using this way I got full control of the fan control from the program used by me.
The solution is fabulously simple and effective. It is therefore recommendable.
That's why I present them.

Video with the presentation: https://www.youtube.com/watch?v=PPMQvdSp644
it's worth listening carefully ;-D
Attachments
przepis_na_wnetylator.jpg
przepis_na_wnetylator.jpg (310.73 KiB) Viewed 21135 times

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: kaktus' guide - fans - however, it was not the end

Post by Tomyuan » Mon May 07, 2018 11:11 am

I have watched the video of yours. That's so cool!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: kaktus' guide - fans - however, it was not the end

Post by _kaktus_ » Sun Oct 28, 2018 2:04 pm

Hello wholeheartedly to all users of the M201 model.
:mrgreen:


The next description was created in the topic about fans of our printer. :D
Everything indicates that this one will be the last one, directly related to fans. :roll:

A link to the description.

:lol:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply