I have a question about how to configure the printer for a hole diameter nozzle:
[list=*]0,2mm
[*]0,3mm
[*]0,5mm
[*]0,8mm[/list]
Additional question, what is the maximum diameter of the nozzle gap for which the printer will work correctly with a 1.75 mm filament?
A diameter of the nozzle gap
Re: A diameter of the nozzle gap
Hole diameter nozzle for M201:0.4mm (Default)
Not commend to use 0.2mm or 0.3mm (Easier to clogged on M201)
The maximum diameter of the nozzle gap depends on the stepper mm value and filament flow.
Not commend to use 0.2mm or 0.3mm (Easier to clogged on M201)
The maximum diameter of the nozzle gap depends on the stepper mm value and filament flow.