Z axis problem

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z axis problem

Post by William » Tue Mar 31, 2020 10:28 am

Hi, can you use screen to move the zaxis?
such as 10 or more?
and change the model to slicr.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Re: Z axis problem

Post by novawaves » Tue Mar 31, 2020 5:56 pm

hi,

now i have a new info. yesterday i notice that the 4 screw on the left threaded rod is loose. so i tighten the screws and the rod will move much harder, when i loosen it the rod will move light. than i saw that the rod is a litte bit bent. do you think this could be my problem? where did i get a new rod?

thx

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z axis problem

Post by William » Tue Mar 31, 2020 6:10 pm

Hi, are the four screws on the brass screws,
Does it play a fixed role?
You can see if the threaded rod is bent,
If you bend, you can contact your sales description.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Re: Z axis problem

Post by novawaves » Wed Apr 01, 2020 3:57 am

hi could you please give me the standard definition which i have to input in control motion menu

please tell me all the constants which are standard in these menu

thx

novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Re: Z axis problem

Post by novawaves » Wed Apr 01, 2020 4:14 am

now i have make a big progress

i have changed the steps / mm for the z axis to 2600 and the extruder moves approximately 10mm when i use the manual controll

so i think i have changed the steps/mm for my i3x with a gcode that i have used.

when i reflash the firmware the steps/mm are 400 so there is a big difference

why is this so and what are the correct factory defaults?

please give me all the factory constants

thx

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z axis problem

Post by William » Wed Apr 01, 2020 9:40 am

Hi, you can refer to this: viewtopic.php?f=66&t=69776
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Re: Z axis problem

Post by novawaves » Wed Apr 01, 2020 1:43 pm

thank you thats the solution, the firmware i updated have 400 steps/mm and i have the left rod wich neets more steps!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z axis problem

Post by William » Wed Apr 01, 2020 1:44 pm

novawaves wrote:
Wed Apr 01, 2020 1:43 pm
thank you thats the solution, the firmware i updated have 400 steps/mm and i have the left rod wich neets more steps!
:D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

topcar
Posts: 3
Joined: Sat Apr 02, 2022 7:22 pm

Re: Z axis problem

Post by topcar » Tue Apr 12, 2022 6:04 pm

The 2022 Jeep Grand Cherokee hpr comes standard with a 6.4-liter V8 SRT engine that develops 475 horsepower and 470 pounds. from the torque. https://www.gtopcars.com/makers/jeep/20 ... -cherokee/

imtopautomag
Posts: 1
Joined: Sat May 21, 2022 6:38 pm

Re: Z axis problem

Post by imtopautomag » Sat May 21, 2022 7:03 pm

The best and top rating SUVs, auto magazines, coupes, Scooters, Motorcycles, wagons, convertibles, minivans, hybrids, and future bikes model collection with photos.https://www.instapaper.com/p/topautomag

Post Reply