Geeetech Prusa i3 Pro X has some issue with the X-axis home

Post Reply
megav13
Posts: 1
Joined: Tue Sep 03, 2019 4:44 pm

Geeetech Prusa i3 Pro X has some issue with the X-axis home

Post by megav13 » Tue Sep 03, 2019 4:47 pm

Hi guys,

I'm just now getting around to trying to fix/upgrade this Prusa i3 Pro X I bought for my robotics team (we have since received a donation from Dremel of one of their machines, but I'd like to get this one working, as well).

I think I've worked out some of the bugs, but now it's doing this weird thing where once it homes the X-axis, the X-pos value on the screen goes from "0" to "402". Trying to start a print when its in this state results in the motors trying to reverse themselves into the frame until they give up or apparently "reach" their destination and it starts printing on that spot or very close to X-home.
Oh, and the heated bed will never reach the setpoint, and does so at the slowest speed possible. I've double and triple checked the wiring and that's good. I might go back and quad-check it, though.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech Prusa i3 Pro X has some issue with the X-axis home

Post by William » Tue Sep 03, 2019 4:56 pm

Hi,Are you setting the print range?
Can I provide a specific operation video?
So that we can solve the problem better. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply