A20m cura cfg with dual color working

Share your configuration profile, please specify your printer model and the slicer software.
Post Reply
circuitsherpa
Posts: 2
Joined: Wed Jul 15, 2020 11:19 am

A20m cura cfg with dual color working

Post by circuitsherpa » Wed Jul 15, 2020 11:30 am

this config works for dual color prints. if the colors mix just change the prime tower setting minimum volume.

you have to run the hotend hot to get dual color prints like 240c for pla lots of priming but it will work. (somewhat) :roll:
Attachments
cura_a20m_dual.zip
cura cfg and profile
(7.56 KiB) Downloaded 750 times

alfvv12
Posts: 29
Joined: Sun Jul 12, 2020 6:06 pm

Re: A20m cura cfg with dual color working

Post by alfvv12 » Sat Mar 06, 2021 6:12 pm

sorry.
pls. can you explain this profile very simple for me...
i dont unerstand really.
thx

Post Reply