Profiles for Repetier Host / Slic3r for A20M?

Share your configuration profile, please specify your printer model and the slicer software.
BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Wed Apr 24, 2019 8:55 pm

Hello,
I'm looking for profiles for the A20M to be used with Repetier Host and the Slic3r software.

The print of the test Dog is quite well but my own parts I tested were underextruded. So I increased extrudion to 120% and later to 150%, but it didn't help.

Or should I try a slower speed?

Is there a Config Bundle available for Slic3r?

Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 9:24 am

Maybe mine's is not perfect.
But you can have a try:
Geeetech A20M.zip
(1.76 KiB) Downloaded 1650 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by William » Thu Apr 25, 2019 9:36 am

Does the extruder working temperature achieve Preset temperature?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:23 pm

William wrote:
Thu Apr 25, 2019 9:36 am
Does the extruder working temperature achieve Preset temperature?
Hello William,
I don't have a thermometer, therefore, I didn't check this. The Dog was printed with 205°C:

Image

This looks very good, I think.

See Discussion here: http://www.geeetech.com/forum/viewtopic ... 08&t=68468

Thanks,
Moritz

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:30 pm

Tomyuan wrote:
Thu Apr 25, 2019 9:24 am
Maybe mine's is not perfect.
But you can have a try:
Geeetech A20M.zip
This one is for ABS, isn't it?

Maybe interesting would be the E-Step value of Your setup. Maybe, my value isn't perfect. I didn't check yet.

Greetings
Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 1:42 pm

Hi,BR365

:D
I am using the PETG for my A20M.
You can change the temp of the bed+temp of the hotend.
Then the others settings same as my PLA setting

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:45 pm

Tomyuan wrote:
Thu Apr 25, 2019 1:42 pm
Hi,BR365

:D
I am using the PETG for my A20M.
You can change the temp of the bed+temp of the hotend.
Then the others settings same as my PLA setting
Thanks,
and could You tell me Your value for Esteps/mm?

Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 1:57 pm

If you want to calibrate your estep.
Refer to this vid:
https://www.youtube.com/watch?v=X3A9Ir2SreI

My estep is 457
:D

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:59 pm

Tomyuan wrote:
Thu Apr 25, 2019 1:57 pm
If you want to calibrate your estep.
Refer to this vid:
https://www.youtube.com/watch?v=X3A9Ir2SreI

My estep is 457
:D
Thanks, I will check.

My current value is 340, AFAIK.

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Mon May 13, 2019 4:02 pm

Hi Vert,
I guess, the only possible solution is to remove these disks.
E-Steps changed to 422 (Calibration done), ...

No new result depending the stringing.
IMG_20190512_153329.jpg
IMG_20190512_153329.jpg (188.35 KiB) Viewed 40536 times

Post Reply