Profiles for Repetier Host / Slic3r for A20M?

Share your configuration profile, please specify your printer model and the slicer software.
JimAero
Posts: 4
Joined: Sun Feb 02, 2020 4:13 am

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by JimAero » Thu Feb 20, 2020 8:05 am

Thanks for the profile. I like using a raft, and I added 1mm thickness to all sides. Works great! Really appreciate it!

JimAero
Posts: 4
Joined: Sun Feb 02, 2020 4:13 am

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by JimAero » Fri Feb 28, 2020 11:08 pm

I am using the Slic3r profile from Tomyuan, but Repetier only shows 1 Extruder. The menu in Slic3r shows 2 extruders. Any help would be welcome.

Thanks!

harris1379
Posts: 1
Joined: Wed Mar 25, 2020 8:05 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by harris1379 » Wed Mar 25, 2020 8:12 pm

BR365 wrote:
Mon May 13, 2019 4:02 pm
Hi Vert,
I guess, the only possible solution is to remove these disks.
E-Steps changed to 422 (Calibration done), ...
mywegmansconnect

No new result depending the stringing.

IMG_20190512_153329.jpg
ya sir we did try other things but its not working

remboroy
Posts: 1
Joined: Thu Apr 08, 2021 10:43 am

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by remboroy » Thu Apr 08, 2021 10:48 am

BR365 wrote:
Thu Apr 25, 2019 1:23 pm
William wrote:
Thu Apr 25, 2019 9:36 am
Does the extruder working temperature achieve Preset temperature?
Hello William,
I don't have a thermometer, therefore, I didn't check this. The Dog was printed with 205°C:

Image

This looks very good, I think.

See Discussion here: http://www.geeetech.com/forum/viewtopic ... 08&t=68468 mywegmansconnect.club

Thanks,
Moritz
Great information
Thanks for sahring

leasehold_s
Posts: 1
Joined: Tue May 10, 2022 12:19 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by leasehold_s » Tue May 10, 2022 12:29 pm

Tomyuan wrote:
Thu Apr 25, 2019 1:57 pm
If you want to calibrate your estep.
Refer to this vid:
https://www.youtube.com/watch?v=X3A9Ir2SreI

My estep is 457
:D
Great Thanks for sharing
very useful information
lease extension calculator

Post Reply