Problem to print

Post Reply
J.wit
Posts: 2
Joined: Wed Dec 15, 2021 10:02 pm

Problem to print

Post by J.wit » Wed Dec 15, 2021 10:17 pm

Hello, i'm a new maker and someone give me a Geeetech I3 pro B.
I can do something with, it work but bad. i don't know how to understzand this and how to fix it.

I'm a new maker, so many things are difficult for me.

This is m'y print pb
Geeetech.png
Geeetech.png (1.2 MiB) Viewed 2543 times

jonsag
Posts: 46
Joined: Tue Feb 06, 2018 5:08 am

Re: Problem to print

Post by jonsag » Thu Dec 16, 2021 4:48 pm

My first thought is a part cooler would improve things.

/jon

J.wit
Posts: 2
Joined: Wed Dec 15, 2021 10:02 pm

Re: Problem to print

Post by J.wit » Mon Dec 20, 2021 6:26 pm

The bed is 60°c
The nozzle is 210°C

jonsag
Posts: 46
Joined: Tue Feb 06, 2018 5:08 am

Re: Problem to print

Post by jonsag » Wed Dec 22, 2021 1:10 am

Turn down the nozzle temp.
Print a part cooler.

Also tune the temp by printing a temperature tower, https://www.thingiverse.com/search?q=te ... t=relevant

/jon

User avatar
Soadyheid
Posts: 62
Joined: Fri Apr 07, 2017 8:55 am

Re: Problem to print

Post by Soadyheid » Fri Jan 21, 2022 12:13 am

Check out this print troubleshooting guide: https://www.simplify3d.com/support/prin ... eshooting/

Hope it helps!

Play Bonny!

Soadyheid

Post Reply