About the z-axis step value

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

About the z-axis step value

Post by William » Tue Dec 24, 2019 6:02 pm

:D Hi,Guys

something about the PRO B z-axis step value

Since the z-axis screw may be different,
The step value in the firmware is 400 by default.
You can modify and save it on the screen according to the situation.

PRO B z轴步进值.jpg
PRO B z轴步进值.jpg (33.48 KiB) Viewed 27118 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

M4df4c3
Posts: 5
Joined: Tue Feb 23, 2021 5:02 pm

Re: About the z-axis step value

Post by M4df4c3 » Fri Feb 26, 2021 10:09 am

Hey, how can I change my z axis step value in the firmware using the Arduino IDE?

I actually have the opposite problem, where I need to change it from 2560 to 400.

Thanks,

-Tony

farolosourgeois
Posts: 1
Joined: Tue Nov 09, 2021 10:04 pm

Re: About the z-axis step value

Post by farolosourgeois » Wed Nov 10, 2021 1:00 pm

I actually have the opposite problem, where I need to change it from 2560 to 400.
orbis heater scam
Last edited by farolosourgeois on Sat Nov 20, 2021 1:40 pm, edited 1 time in total.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: About the z-axis step value

Post by Admin » Fri Nov 12, 2021 5:18 pm

If you need the source code, please check the link: https://github.com/Geeetech3D/Prusa_I3_3Dprinter

julia1304
Posts: 4
Joined: Wed May 18, 2022 3:16 pm

Re: About the z-axis step value

Post by julia1304 » Wed May 18, 2022 3:27 pm

Love this game so much! Let's share it with many people, because it is a great game. Too awesome spades

jacobhue
Posts: 6
Joined: Sat Jun 04, 2022 12:24 am

Re: About the z-axis step value

Post by jacobhue » Sun Jun 19, 2022 11:20 pm

The z-axis step value is the distance from the origin or origin in a direction parallel to the z-axis.

The default value for this axis is 0.

If you specify a value for this axis, then this axis will be used for all coordinates in that coordinate system.omegle bazoocam chatrandom

jacobhue
Posts: 6
Joined: Sat Jun 04, 2022 12:24 am

Re: About the z-axis step value

Post by jacobhue » Thu Jul 14, 2022 10:29 pm

Hello, how might I change my z pivot step esteem in the firmware utilizing the Arduino IDE?

I really have the contrary issue, where I really want to transform it from 2560 to 400.

Much appreciated,https://www.omegle.fyi/ https://www.bazoocam.fyi/ https://www.chatrandom.one/

Post Reply