Filament detector with GT2560 board.

JohnDeere630
Posts: 9
Joined: Sat Oct 01, 2016 8:12 am

Filament detector with GT2560 board.

Post by JohnDeere630 » Fri Mar 16, 2018 1:14 am

I bought this filament detector on Amazon: https://www.amazon.com/Dovewill-Filamen ... t+detector
and got it to work on my GT2560 board-controlled I3. The wire from the sensor had to be rearranged on the board end, a 3-pin socket soldered in place of the 2-pin X-max socket, and pin assignments adjusted.......

Update 10/21/18.....
I am now running the latest Marlin firmware, Version 1.1.9, and nothing is changed except the Configuration.h and pins_GT2560_REV_A.h files, which I am attaching.
Below is the diagram I drew up to help keep the connections straight. Note that the socket that the filament detector plugs into, formerly the X-max sensor socket, has been replaced with a 3-pin socket to allow inclusion of the 5V+ pin. The wires coming from the detector had to be rearranged to match the socket.
Attachments
Changed_Files.zip
(24.68 KiB) Downloaded 703 times
GT2560 Overview.jpg
GT2560 Overview.jpg (71.61 KiB) Viewed 20746 times
Last edited by JohnDeere630 on Mon Oct 22, 2018 6:22 am, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Filament detector with GT2560 board.

Post by William » Tue Mar 20, 2018 1:58 pm

Thanks for sharing! :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

JohnDeere630
Posts: 9
Joined: Sat Oct 01, 2016 8:12 am

Re: Filament detector with GT2560 board.

Post by JohnDeere630 » Wed Mar 21, 2018 9:10 am

No problem. I got sick of baby-sitting long prints and wasting filament when I couldn't. It was an easy process, and has already paid for itself many times over.

Asuea
Posts: 0
Joined: Sat May 05, 2018 6:59 pm

Re: Filament detector with GT2560 board.

Post by Asuea » Sat May 05, 2018 7:03 pm

Hi JohnDeere630
How did you do that?
What did you change in the pins_ULTIMAKER.h code?
I'd like to know.

Thanks.

Asuea
Posts: 0
Joined: Sat May 05, 2018 6:59 pm

Re: Filament detector with GT2560 board.

Post by Asuea » Sat May 05, 2018 7:15 pm

Hi JohnDeere630

How did you do that?
What did you change in the pins_ULTIMAKER.h code?
I'd like to know.

Thank you very much.

JohnDeere630
Posts: 9
Joined: Sat Oct 01, 2016 8:12 am

Re: Filament detector with GT2560 board.

Post by JohnDeere630 » Tue May 08, 2018 2:11 pm

Asuea,

There were 2 changes needed to the pins_ULTIMAKER.h file:
under the Limit Switches section, change the #define X_MAX_PIN value to #define X_MAX_PIN -1
and under the Misc. Functions, add this line: #define FIL_RUNOUT_PIN 24

This disables the X-max pin assignment, and reassigns pin 24 to the filament runout sensor.

Hope this helps!

Asuea
Posts: 0
Joined: Sat May 05, 2018 6:59 pm

Re: Filament detector with GT2560 board.

Post by Asuea » Sat May 12, 2018 2:40 am

[quote=JohnDeere630 post_id=84086 time=1525759883 user_id=52773]
Asuea,

There were 2 changes needed to the pins_ULTIMAKER.h file:
under the Limit Switches section, change the #define X_MAX_PIN value to #define X_MAX_PIN -1
and under the Misc. Functions, add this line: #define FIL_RUNOUT_PIN 24

This disables the X-max pin assignment, and reassigns pin 24 to the filament runout sensor.

Hope this helps!
[/quote]

Thanks

But I had to make the changes in pin_GT2560_REV_A.h. instead of pins_ULTIMAKER.h. because my 3D printer is a CTC clone and my motherboard is a 2560 REV A

It works!!

Ikn369330
Posts: 1
Joined: Sun Oct 15, 2017 9:08 pm

Re: Filament detector with GT2560 board.

Post by Ikn369330 » Thu May 31, 2018 7:19 pm

Hi there, did your filament switch come with 3 wires and if so how did you wire that up on the GT2560 controller board?

JohnDeere630
Posts: 9
Joined: Sat Oct 01, 2016 8:12 am

Re: Filament detector with GT2560 board.

Post by JohnDeere630 » Tue Jun 05, 2018 7:34 am

@ Ikn369330,
I'm sorry I didn't see this earlier; did you get this sorted? I had desolder the 2-pin X-max socket on the motherboard, and solder in a 3-pin socket.

I made up a drawing to label the connectors on the board...
Attachments
GT2560 Overview.jpg
GT2560 Overview.jpg (71.61 KiB) Viewed 20747 times
Last edited by JohnDeere630 on Mon Oct 22, 2018 3:31 am, edited 1 time in total.

Blisk
Posts: 28
Joined: Wed Dec 23, 2015 3:05 am

Re: Filament detector with GT2560 board.

Post by Blisk » Tue Jul 17, 2018 8:01 pm

Can someone help me with this.
I didn't find file pins_ULTIMAKER.h but it is pins.h
but still can't find a place where to add #define FIL_RUNOUT_PIN 24
Can someone help me with this?
Marlin_GT2560-PI3_Pro_C.zip
(299.21 KiB) Downloaded 736 times

Post Reply