A30T Mixed Colour

Post Reply
jamie2fingers
Posts: 2
Joined: Fri Jun 11, 2021 11:11 pm

A30T Mixed Colour

Post by jamie2fingers » Thu Oct 14, 2021 4:03 am

Hi,

I really like the effect of mixing black and blue 50/50 but when I do different sides of the object I print come out with more or less ratio of the colours.
See this combination lock box I designed. You will notice that three sides are predominantly black and one is mainly blue:


https://share.icloud.com/photos/0Gon6tx ... St._Albans

Any ideas what is happening any how I can get a more even mix?
Thanks

Post Reply