Calibration of A30T extruders

Post Reply
nickscorpion
Posts: 13
Joined: Tue Nov 24, 2020 5:25 am

Calibration of A30T extruders

Post by nickscorpion » Sun Aug 22, 2021 2:16 am

I decided to measure the extrusion distance and when measured on the second extruder, it extruded 93mm. I changed the settings, but now the problem is that the first extruder extrudes 106mm, and the second and third as expected 100mm. Why the distance is different is not clear. Now I'm thinking how to change the settings only for the first one. Can anyone come across this or can the support team be able to suggest something?

parcgreenwichsite
Posts: 1
Joined: Tue Aug 31, 2021 2:12 pm

Re: Calibration of A30T extruders

Post by parcgreenwichsite » Tue Aug 31, 2021 2:15 pm

From the Sengkang MRT station, it's beginning and end with the exception of's a straight train ride to different spots of interest including Little India, Dhoby Ghaut, Clarke Quay, Chinatown, and Harbourfront. For parc greenwich price pool-slanted families, you'll be spoilt for decision with three 50m Lap Pools and going with Pool Decks, with pet yards to get your four-pawed furries the vital runabout.

Post Reply