A30T Model Order Triple Color

Post Reply
chuckthetekkie
Posts: 1
Joined: Fri May 14, 2021 4:33 am

A30T Model Order Triple Color

Post by chuckthetekkie » Fri Jul 16, 2021 12:32 am

Is there a way to tell my A30T the order of the model to print each layer? I have a 2D figure that has an outline which I want printed first and then the inside with a different color and then the last model.

I want each layer to print in the following order:

1. Outline
2. Figure inside
3. Figure's rosy cheeks.

Is that possible using any slicer?

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: A30T Model Order Triple Color

Post by Admin » Fri Jul 16, 2021 10:27 am

Hello, the printer can only print layer by layer, not what you said.

KamsanYoun
Posts: 4
Joined: Thu Jul 08, 2021 2:13 am

Re: A30T Model Order Triple Color

Post by KamsanYoun » Tue Jan 18, 2022 12:28 am

chuckthetekkie wrote:
Fri Jul 16, 2021 12:32 am
Is there a way to tell my A30T the order of the model to print each layer? I have a 2D figure that has an outline which I want printed first and then the inside with a different color and then the last model.

I want each layer to print in the following order:

1. Outline
2. Figure inside
3. Figure's rosy cheeks. omegle xender


Is that possible using any slicer?
I can get this for a good deal right now, sub $300. I don't need to print this large very often, but overall what are the thoughts on this vs what else?

Does it actually have an all metal hotend, is it going to be a pain or is it pretty straightforward? I currently have an a10, but I got it used and its in rougher shape than I realized

Post Reply