Filament not feeding

Post Reply
elboy0712
Posts: 1
Joined: Tue Jan 05, 2021 12:26 pm

Filament not feeding

Post by elboy0712 » Sun Jan 17, 2021 5:18 am

I just got my A30 printer and the filament for my #0 stops feeding or doesnt feed at all constantly. I can see that the wheel is turning to push it through but it feels stuck. If start pushing it super hard it goes again. I tried adjusting the tension with the screw on the side but it doesnt seem to change anything.

Any ideas? This is really frustrating as it makes the printer useless.

Nozzle temp is right at 200C
Filament is geeetech brand PLA

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Filament not feeding

Post by William » Thu Jan 28, 2021 4:52 pm

Hello, you can use the search function in the forum to find a solution easily.
If it is a hardware problem, you need to contact geeetech official, please use the ticket system to communicate with them.
Attachments
ticket process.rar
(389.76 KiB) Downloaded 338 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply