New to 3D printing and need help!!

IanSantiago
Posts: 2
Joined: Tue Jul 14, 2020 7:30 pm

New to 3D printing and need help!!

Post by IanSantiago » Tue Jul 14, 2020 7:32 pm

I'm glad there's such a big community on here.

I just started using my 3D printer today (Ender 3 Pro). I have tried to print the test print that comes with it (a dog) 5 times now and I can't get more than 1.5mm in height before the nozzle starts to drag the filament and the print is ruined.

Things I've tried:

Increasing distance between nozzle and bed (this produced even worse results)

Bringing nozzle and bed closer (this worked for longer, but eventually dragged it any way.

My nozzel temp is set to 185 and the bed is set to 45.

At this point, I'm so green it's challenging to troubleshoot and I'm sure others on here have had similar challenges. Does anyone have any suggestions to fix this problem?

Thanks so much ahead of time for the help!

AndreaMartin
Posts: 1
Joined: Wed Jul 22, 2020 12:03 am

Re: New to 3D printing and need help!!

Post by AndreaMartin » Wed Jul 22, 2020 12:06 am

Thanks for providing valuable content. With your post
van rental dallas, I got Lots of great ideas. and now I am going to make list just like you mentioned in your post.

alexcubals
Posts: 1
Joined: Tue Feb 09, 2021 8:11 pm

Re: New to 3D printing and need help!!

Post by alexcubals » Tue Feb 09, 2021 8:17 pm

A shame my friend. Have you talked to the supplier? Surely you need to adjust something in the printer. What is happening to you is not normal. We have one in our car rental office and we have no problem. You should talk to the provider. When BCO Bookings made the order online, it took us about 30 days to arrive, but once the printer was installed, everything went very well.

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Wed Feb 10, 2021 6:50 pm

En Alicante Existe encontrarás la mejor información sobre Alicante si vas a visitar la ciudad dentro de poco. Te recomiendo que eches un vistazo a su web :D

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 5:40 pm

¡Buenas! Si buscas información sobre Barcelona para disfrutar de tus próximas vacaciones a tope en la ciudad, te recomiendo que visites la web de https://www.barcelonaexiste.es. En ella, encontrarás toda la información sobre Barcelona necesaria para moverte por la ciudad como un local más. Te la recomiendo ^^

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 6:29 pm

Hi.

When I travel to Spain, for example, I usually rent cars at Airport Spain because I have always been told that picking up the car at any of the airports in Spain is cheaper to avoid fees. Do you agree on this?

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 6:36 pm

Cuando la gente habla de Valencia se centra en El Carmen, el Mercado Central, El Miguelete... ¿Pero el interior y los pueblos de alrededor? Son realmente maravillosos. Por ejemplo Oliva, me encanta ese pueblo. La localidad valenciana de Oliva tiene muchos secretos que todo el mundo debe conocer y vivir, al menos, una vez en la vida. Os lo recomiendo.

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 7:08 pm

Si te vas de viaje y necesitas proceder al alquiler de coches por internet, te recomiendo que lo hagas a través de ABC Rentacar. En este comparador de alquiler de coches trabajan con los mejores rent a car del sector, con quienes han cerrado los mejores acuerdos de precios. Os lo recomiendo.

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 7:35 pm

Si estás buscando un rent a car barato donde proceder al alquiler de coches a través de internet. Te recomiendo encarecidamente que lo hagas a través de ACB Rentacar. He llegado a alquilar un coche por solo dos euros al día. Vaya, toda una ganga.

lolafay
Posts: 12
Joined: Wed Feb 10, 2021 6:43 pm

Re: New to 3D printing and need help!!

Post by lolafay » Thu Feb 11, 2021 7:37 pm

¡Cómo me gusta Madrid y cómo disfruto sus alrededores! Hace no mucho visité el pueblo de Navalcarnero y he de confesar que me encantó. Madrid no solo es el centro, hay mucho más a su alrededor que te recomiendo visitar, en serio.

'¡¡¡Saludos!!!!

Post Reply