Acceleration

Toni911
Posts: 0
Joined: Fri Feb 16, 2018 1:49 am

Acceleration

Post by Toni911 » Tue Apr 03, 2018 3:51 pm

Hi, I need to change the acceleration. It’s way to fast With the original firmeware.


I have a couple of questions.


how can I burn a boot loader ?
I need the right firmware that I can modify the values.
I guess all the a30 users like to modify the firmware

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Acceleration

Post by William » Tue Apr 03, 2018 8:45 pm

Have you tried to refer to this post?
viewtopic.php?f=17&t=60639&p=82054#p82054
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Toni911
Posts: 0
Joined: Fri Feb 16, 2018 1:49 am

Re: Acceleration

Post by Toni911 » Tue Apr 03, 2018 8:53 pm

Hi, yes I tried. But he is telling me an error while changing velocity



Is there any way to get marlin on that machine

Toni911
Posts: 0
Joined: Fri Feb 16, 2018 1:49 am

Re: Acceleration

Post by Toni911 » Tue Apr 03, 2018 9:04 pm

thats the message

-----------------------------------------
Error, Setting motor failed! Details: cannot concatenate 'str' and 'instance' objects

Toni911
Posts: 0
Joined: Fri Feb 16, 2018 1:49 am

Re: Acceleration

Post by Toni911 » Tue Apr 03, 2018 9:08 pm

thats the message

-----------------------------------------
Error, Setting motor failed! Details: cannot concatenate 'str' and 'instance' objects


and even it will work,

i have to set it after every reboot again???

and velocity is not the acceleration. the speed is fine, the machine just do it to hard.

the acceleration is not ok.

friendbg
Posts: 1
Joined: Fri Jun 29, 2018 7:17 am

Re: Acceleration

Post by friendbg » Fri Jun 29, 2018 7:23 am

Unfortunately acceleration is very high indeed.
The frame is shaking all my desk even on slow speed printing compared to my other Zonestar printer and I can't find a way to change it.
Anybody know around?

jybewuzeg
Posts: 1
Joined: Fri Sep 18, 2020 1:55 pm

Re: Acceleration

Post by jybewuzeg » Fri Sep 18, 2020 1:56 pm

the gee tech 3d printer has been made for the toys making on every type. This technology has been using some dissertation writing services reviews due to which it has been accelerated as well.

USMCPelto
Posts: 7
Joined: Fri Sep 04, 2020 9:07 pm

Re: Acceleration

Post by USMCPelto » Sat Sep 19, 2020 7:21 am

viewtopic.php?f=17&t=60639&p=82054#p82054

This helped me a LOT. That and slowing everything WAY down. May take a lot longer, but everything prints with great precision. Adding the glass bed added a lot of weight to the build platform and for the stepper motor to overcome.

JuliS
Posts: 9
Joined: Sat Feb 12, 2022 3:27 am

Re: Acceleration

Post by JuliS » Fri Mar 11, 2022 10:15 pm

Hello friends! I want to share with you an interesting place where barbershop new york shop professionals work. Based on the results of their work, many years of experience are visible, which affects the excellent result. Received excellent service and good mood for a long time.

JuliS
Posts: 9
Joined: Sat Feb 12, 2022 3:27 am

Re: Acceleration

Post by JuliS » Fri Mar 18, 2022 11:53 pm

Hello. I want to share my delight after visiting https://vrmed.nyc/. I was greeted with excellent service, professionalism and attention, leaving a charge of cheerful mood. Listen to my advice and make sure of the quality.

Post Reply