A30 firmware.

Post Reply
User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

A30 firmware.

Post by Admin » Sat Feb 24, 2018 3:26 pm

If the Z axis endstop of your A30 is on the bottom , you can install this firmware.

Connect your printer to your computer with USB cable, then choose the right COM port.
TIM图片20180224152012.png
TIM图片20180224152012.png (37.57 KiB) Viewed 52374 times

choose the right version, then click "upgrade"
T%OM3L8WV`6GD6SOY0)D([N.png
T%OM3L8WV`6GD6SOY0)D([N.png (31.32 KiB) Viewed 52374 times


upgrade.zip
(7.44 MiB) Downloaded 2060 times

vadimnv66
Posts: 1
Joined: Fri Dec 01, 2017 3:04 pm

Re: A30 firmware.

Post by vadimnv66 » Mon Mar 26, 2018 7:58 pm

Hi !

I have the A30 c EndStop located at the top, but it's not very convenient ((
I want to remake to the bottom
How can I do this - please give instructions

Thank you, Vadim

nitro_sport2003
Posts: 0
Joined: Thu May 03, 2018 10:54 pm

Re: A30 firmware.

Post by nitro_sport2003 » Fri May 04, 2018 9:34 am

Hi do i need to put a jumper plug on board before connecting the usb cable to computer?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: A30 firmware.

Post by _kaktus_ » Fri May 04, 2018 11:18 pm

Generally, you can do this before turning on the power.
Alternatively, if the power supply is switched on, when you put on the jumper cap, press reset.
The bootloader will then be active.

nitro_sport2003
Posts: 0
Joined: Thu May 03, 2018 10:54 pm

Re: A30 firmware help please

Post by nitro_sport2003 » Sat May 05, 2018 8:11 pm

Hi can not get the firmware to load onto the A30 its a brand new board never had software uploaded onto it before is there something else i have to do before i can load the firmware to it? or could it be a issue with my computer not linking to motherboard with USB cable because i'm using windows 10 any ideas? answers please let me know i download the A30 kit firmware but wont upload firmware to board.

User avatar
Alienmoon
Posts: 11
Joined: Wed Apr 25, 2018 7:13 pm
Location: Othalla

Re: A30 firmware.

Post by Alienmoon » Wed Jun 20, 2018 6:05 am

Admin wrote:
Sat Feb 24, 2018 3:26 pm
If the Z axis endstop of your A30 is on the bottom , you can install this firmware.

Connect your printer to your computer with USB cable, then choose the right COM port.
TIM图片20180224152012.png


choose the right version, then click "upgrade"
T%OM3L8WV`6GD6SOY0)D([N.png


upgrade.zip

@Admin

Hello,... I'd like to ask you a few questions about the A30.



Q1: I've been trying to find what type of Firmware, the A30 is using,... however, I can't find the name of it, is it a Marlin branch or something other than Marlin?



Q2: The other question I have is about the Mainboard type,... What is the name / Model of the Mainboard / Motherboard, within the Control Box?

The Prusa i3 PRO B mainboard is a GT2560 A+,... what is inside the control Box for the A30?



Thank You.
I Want To Believe

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: A30 firmware.

Post by Gingko » Wed Jun 20, 2018 4:15 pm

Alienmoon wrote:
Wed Jun 20, 2018 6:05 am

@Admin

Hello,... I'd like to ask you a few questions about the A30.



Q1: I've been trying to find what type of Firmware, the A30 is using,... however, I can't find the name of it, is it a Marlin branch or something other than Marlin?



Q2: The other question I have is about the Mainboard type,... What is the name / Model of the Mainboard / Motherboard, within the Control Box?

The Prusa i3 PRO B mainboard is a GT2560 A+,... what is inside the control Box for the A30?



Thank You.
1, It's not Marlin firmware, it names Smartto, developed by Geeetech and is also opensource now. You can check the version from LCD.
More information: https://github.com/Geeetech3D/Smartto/

2, Mainboard type for A30 is GTM32 mini s.

User avatar
Alienmoon
Posts: 11
Joined: Wed Apr 25, 2018 7:13 pm
Location: Othalla

Re: A30 firmware.

Post by Alienmoon » Thu Jun 21, 2018 9:37 pm


1, It's not Marlin firmware, it names Smartto, developed by Geeetech and is also opensource now. You can check the version from LCD.
More information: https://github.com/Geeetech3D/Smartto/

2, Mainboard type for A30 is GTM32 mini s.

Thanks, for this information, this has been something I've looked for since receiving the GEEETech A30.

Thanks, again.
I Want To Believe

Uranium
Posts: 2
Joined: Tue Jul 03, 2018 2:10 am

Re: A30 firmware.

Post by Uranium » Tue Jul 03, 2018 2:14 am

Bonjour,

Est-il possible d'avoir un tutoriel pour savoir compiler le firmware ???

Sur GitHub ( https://github.com/Geeetech3D/Smartto ), j'ai vu qu'il existe la version A30_V1.37.59, comment fait-on pour l'installer sur nos imprimantes ??

Merci de votre réponse

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: A30 firmware.

Post by Gingko » Thu Jul 05, 2018 6:05 pm

Uranium wrote:
Tue Jul 03, 2018 2:14 am
Bonjour,

Est-il possible d'avoir un tutoriel pour savoir compiler le firmware ???

Sur GitHub ( https://github.com/Geeetech3D/Smartto ), j'ai vu qu'il existe la version A30_V1.37.59, comment fait-on pour l'installer sur nos imprimantes ??

Merci de votre réponse
You can download the newest .bin file first, then use Smartto firmware tool to upgrade it.
http://geeetech.com/firmware/
https://github.com/Geeetech3D/Smartto/b ... forWin.zip

Post Reply