- Posts: 4
- Joined: Fri Jun 18, 2021 1:11 pm
Does anyone knows why this common setup sequence gets my E180 mad?
The printer beeps and stops without printing when it receive this:10.0.0.0.1 192.168.1.254
Last edited by LavenderBirch
on Wed Jul 28, 2021 8:23 pm, edited 1 time in total.
- Posts: 451
- Joined: Wed Nov 30, 2011 9:49 am
Hello, the firmware of E180 is not marlin firmware and does not support every gcode.