Preventive maintenance?

Post Reply
xafr
Posts: 2
Joined: Mon Jan 13, 2020 2:53 am

Preventive maintenance?

Post by xafr » Thu Feb 06, 2020 6:52 pm

Hi,

is there any maintenance needed with the E180? What need to be lubed up sometimes and what cannot be lubed up?
What do you clean and how?

Thanks!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Preventive maintenance?

Post by William » Fri Feb 07, 2020 8:52 am

Hi,You need to pay attention to the wear of the nozzle, then you can lubricate the bearing.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Ryan04
Posts: 2
Joined: Sat Feb 20, 2021 8:07 pm

Re: Preventive maintenance?

Post by Ryan04 » Sat Feb 20, 2021 8:11 pm

It has a broken contact. I fixed it temporally by a small welding, but I would like to get a new intact cable.

playsolitaireaz
Posts: 5
Joined: Thu Jan 07, 2021 4:00 pm

Re: Preventive maintenance?

Post by playsolitaireaz » Thu Feb 25, 2021 3:04 pm

I should express that I like this article so a ton and moreover using it in regular. I believe you would continue sharing better than average articles here.
play solitaire

Post Reply