How to fix-E180>The screen displayed not correct or black screen

Mustye180
Posts: 11
Joined: Sun Mar 31, 2019 5:31 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by Mustye180 » Tue May 19, 2020 9:23 pm

I found jtag pinout and connected the lcd via st- link. But I dont have flashing file to upload. Geeetech technical said me:Metal head: v2.02
Ceramic head: 1.32.41
The two versions are incompatible
Update the corresponding version. So I installed the wrong update.
Attachments
40A507D2-2224-413E-A0EC-01269754F083.jpeg
40A507D2-2224-413E-A0EC-01269754F083.jpeg (670.76 KiB) Viewed 27198 times

Mustye180
Posts: 11
Joined: Sun Mar 31, 2019 5:31 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by Mustye180 » Tue May 19, 2020 10:20 pm

Lcd jtag connection pinout. For flash with st-link v2.
Attachments
B3632128-865D-4739-8D1C-F81E139C4714.jpeg
B3632128-865D-4739-8D1C-F81E139C4714.jpeg (665.83 KiB) Viewed 27195 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Wed May 20, 2020 10:41 am

maybe you need this:
E180-V2.02.02版-去掉密码.rar
(804.41 KiB) Downloaded 733 times
Motherboard application: E180_M04_V2_02.bin

Motherboard boot program: MotherBoot_bootloader_V1.0.bin

LCD screen application: E180_S01_V2_02.bin

LCD screen boot program: LCD_E180_bootloader_V2.0.hex
The SD card needs to be formatted before use, as shown in the attached picture. Note that when unplugging and inserting the SD card on the computer, the SD card needs to be ejected first and then removed.


The motherboard boot uses the "Flash Loader Demo" programming tool for programming, and the motherboard application uses the "firmware_tool_V2.0" programming tool for programming and must be the firmware_tool tool of version V2.0 or later.

The screen guide uses the ST-LINK emulator for burning, and the firmware is LCD_E180_bootloader_V2.0.hex; the application uses the "firmware_tool_V2.0" burning tool for burning, and the file is E180_S01_V2_02.bin, or the ST-LINK When recording, fill in the address as 0x08010000.


When the firmware is burned, the boot file is burned first, and then the application file is burned.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mustye180
Posts: 11
Joined: Sun Mar 31, 2019 5:31 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by Mustye180 » Thu May 21, 2020 5:44 am

Everything was so beautiful. I did the narratives step by step and my lcd screen and motherboard were seamlessly updated to v2.02. Thank you very much to my friend William for their help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Thu May 21, 2020 10:14 am

:D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

smiehoo
Posts: 6
Joined: Sat Mar 28, 2020 6:19 am
Location: PL

Re: How to fix-E180>The screen displayed not correct or black screen

Post by smiehoo » Thu Jun 04, 2020 3:01 am

Sorry Mustye180, I wasn't on forum two months.

William - can You explain what is different V1 and V2 - I flashed my printer V2(metal hotend) flash from V1(ceramic hotend), and It working perfect.

On the information screen shows V1.6-null.
v16.JPG
v16.JPG (43.62 KiB) Viewed 26693 times
Now on download section the V2 firmware is enable, a little to late.

Regards
Last edited by smiehoo on Fri Jun 05, 2020 12:28 am, edited 2 times in total.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Thu Jun 04, 2020 9:49 am

Sorry I can't view the picture, can I upload it again?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

psqdny
Posts: 1
Joined: Sun Jun 21, 2020 3:10 pm

Re: How to fix-E180>The screen displayed not correct or black screen

Post by psqdny » Sun Jun 21, 2020 3:16 pm

William wrote:
Wed May 20, 2020 10:41 am
maybe you need this:E180-V2.02.02版-去掉密码.rar
Motherboard application: E180_M04_V2_02.bin

Motherboard boot program: MotherBoot_bootloader_V1.0.bin

LCD screen application: E180_S01_V2_02.bin

LCD screen boot program: LCD_E180_bootloader_V2.0.hex
The SD card needs to be formatted before use, as shown in the attached picture. Note that when unplugging and inserting the SD card on the computer, the SD card needs to be ejected first and then removed.


The motherboard boot uses the "Flash Loader Demo" programming tool for programming, and the motherboard application uses the "firmware_tool_V2.0" programming tool for programming and must be the firmware_tool tool of version V2.0 or later.

The screen guide uses the ST-LINK emulator for burning, and the firmware is LCD_E180_bootloader_V2.0.hex; the application uses the "firmware_tool_V2.0" burning tool for burning, and the file is E180_S01_V2_02.bin, or the ST-LINK When recording, fill in the address as 0x08010000.


When the firmware is burned, the boot file is burned first, and then the application file is burned.
Hello. Where i can find "firmware_tool_V2.0"?

My printer is not working after trying to upgrade the firmware.
My LCD board is like show @Mustye180.
Yesterday before upgrading the firmware with EasyPrint, i had v2 firmware. My printer have metal hotend, it seems like MK8.

Please help me to upload correct firmware.
Thank You.
-----------------------------

I made it. My printer works like before.
frimware_tool_v2.0 i found here -> https://www.geeetech.com/download.html?download_id=40
Before i didn't see it becouse there need to click on plus + Firmware Toolkit For Geeetech Printer to see file for windows.

firmware E180-V2.02.02 i had download from here -> https://www.geeetech.com/download.html?download_id=41

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Mon Jun 22, 2020 10:51 am

psqdny wrote:
Sun Jun 21, 2020 3:16 pm
William wrote:
Wed May 20, 2020 10:41 am
maybe you need this:E180-V2.02.02版-去掉密码.rar
Motherboard application: E180_M04_V2_02.bin

Motherboard boot program: MotherBoot_bootloader_V1.0.bin

LCD screen application: E180_S01_V2_02.bin

LCD screen boot program: LCD_E180_bootloader_V2.0.hex
The SD card needs to be formatted before use, as shown in the attached picture. Note that when unplugging and inserting the SD card on the computer, the SD card needs to be ejected first and then removed.


The motherboard boot uses the "Flash Loader Demo" programming tool for programming, and the motherboard application uses the "firmware_tool_V2.0" programming tool for programming and must be the firmware_tool tool of version V2.0 or later.

The screen guide uses the ST-LINK emulator for burning, and the firmware is LCD_E180_bootloader_V2.0.hex; the application uses the "firmware_tool_V2.0" burning tool for burning, and the file is E180_S01_V2_02.bin, or the ST-LINK When recording, fill in the address as 0x08010000.


When the firmware is burned, the boot file is burned first, and then the application file is burned.
Hello. Where i can find "firmware_tool_V2.0"?

My printer is not working after trying to upgrade the firmware.
My LCD board is like show @Mustye180.
Yesterday before upgrading the firmware with EasyPrint, i had v2 firmware. My printer have metal hotend, it seems like MK8.

Please help me to upload correct firmware.
Thank You.
-----------------------------

I made it. My printer works like before.
frimware_tool_v2.0 i found here -> https://www.geeetech.com/download.html?download_id=40
Before i didn't see it becouse there need to click on plus + Firmware Toolkit For Geeetech Printer to see file for windows.

firmware E180-V2.02.02 i had download from here -> https://www.geeetech.com/download.html?download_id=41
Awesome! :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Cerber
Posts: 4
Joined: Fri Jul 31, 2020 1:37 pm

Re: How to fix-E180>The screen displayed not correct or black screen

Post by Cerber » Fri Jul 31, 2020 1:43 pm

Hello
I have a similar problem with the black screen on the E180 printer. I made the system with a memory card and it worked for a while but it probably fell completely. Does screen replacement solve the problem or is it a system problem?

Post Reply