Geeetech Superplate - NTC-MF52AT Thermistor

Post Reply
flat-jack
Posts: 13
Joined: Fri Sep 28, 2018 10:14 pm

Geeetech Superplate - NTC-MF52AT Thermistor

Post by flat-jack » Wed Dec 19, 2018 5:00 pm

Hi,
is it possible to get a datasheet for the NTC-MF52AT thermistor used in the following heatbed:

https://www.geeetech.com/geeetech-super ... -1019.html

It is nowhere mentioned which preset should be used in the Marlin configuration.h.
Maybe you could tell me wich preset to use? Or with the datasheet I am able to write my own temptable.

Thx

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geeetech Superplate - NTC-MF52AT Thermistor

Post by _kaktus_ » Thu Dec 20, 2018 12:59 am

On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

flat-jack
Posts: 13
Joined: Fri Sep 28, 2018 10:14 pm

Re: Geeetech Superplate - NTC-MF52AT Thermistor

Post by flat-jack » Thu Dec 20, 2018 1:29 am

Hi, thx for the Datasheet.
But having a problem with finding the correct thermistor in it.
On the geeetech homepage, under specification it is writen: "Resistance value at R25℃ = 80KΩ"
But there is no such thermistor in the datasheet.
Maybe you can tell me the correkt B-value of the thermistor?

Thx for your help.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geeetech Superplate - NTC-MF52AT Thermistor

Post by _kaktus_ » Thu Dec 20, 2018 5:01 am

Hi.

Ask the GT sellers.
I don't know what they wrote, but you can do the experience and measure the resistances at a certain temperature.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply