Heated bed set/indicated vs real temp

Post Reply
indy
Posts: 7
Joined: Mon Jan 30, 2017 9:53 pm

Heated bed set/indicated vs real temp

Post by indy » Fri Apr 21, 2017 4:54 am

Hi. I have got the level that my prints are good enough, but now I'm experiencing problems with my prints warping and bending in middle of print.

In short, the problem seems to be in heated bed temp... Is my bed broken or should I adjust temp meaning set higher and check my infrared temp meter?

56 real temp vs 90 indicated temp is so big difference.

Image

Any suggestions?

Thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Heated bed set/indicated vs real temp

Post by William » Fri Apr 21, 2017 2:50 pm

Hi,obviously there maybe something wrong with the thermistor and heating cartrige.Please check them.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply