24v PSU upgrade

Post Reply
User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

24v PSU upgrade

Post by JustinSB » Fri Feb 23, 2018 4:52 am

If I was to upgrade my existing 12V 15A Geeetech PSU to a 24V 20A PSU, am I right in thinking that all I would need to do is to just plug it straight into my GT2560A+ board using exactly the same cable configuration - then change the soldered cable connection to the hotbed from the 12V to the 24V connection that's next to it?

Is it really that simple?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 24v PSU upgrade

Post by William » Mon Feb 26, 2018 7:04 pm

You can upgrade 12V PSU to 24V,don't need change anything
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: 24v PSU upgrade

Post by apak » Thu Aug 23, 2018 7:10 am

I have read somewhere that A30 psu corrently is 12V but soon to be upgrade to 24V.

May we update the 12V PSU to 24V just plug and play or we will need to do changes ?? thanks

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: 24v PSU upgrade

Post by Admin » Thu Aug 23, 2018 10:46 am

Refer to this pic
A30-12V PSU Upgrade To 24V PSU.png
A30-12V PSU Upgrade To 24V PSU.png (211.61 KiB) Viewed 21089 times

Post Reply