PCB fail

Post Reply
Mick_geeetechi3
Posts: 13
Joined: Mon Jun 24, 2019 7:06 am

PCB fail

Post by Mick_geeetechi3 » Sat May 16, 2020 10:56 am

Hi, I have been printing successfully for quite some time now, but during my last print the printer stopped and nothing displays on the LCD anymore, neither does the board have LEDs lit up, when powered via the PSU.

I have plugged in a laptop direct via USB and I am getting the LCD to backlight (green) but no data is displaying. Has my board fried or is it something else?

jlshull
Posts: 1
Joined: Thu Feb 27, 2020 9:20 am

Re: PCB fail

Post by jlshull » Sun May 17, 2020 11:29 pm

Check the 2 nano fuses on the board. there is a 15a (nearest the usb port i think) and the other is a 10a.

If they are ok - try re flash the firmware.

Hope this helps

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: PCB fail

Post by William » Mon May 18, 2020 12:02 pm

Hi,you can measure the motherboard voltage, refer to this link: viewtopic.php?f=23&t=17040
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ArcherHoulding
Posts: 2
Joined: Wed Dec 09, 2020 12:36 pm

Re: PCB fail

Post by ArcherHoulding » Thu Mar 25, 2021 8:08 pm

Get ready to complete its coursework. They are going to pay a better amount for it. So here is a great opportunity to learn online from edubirde by sitting at home to complete the assignments of the students. Stay tuned to this blog to learn and about more projects.

Post Reply