Geeetech Voice Recognition Module

Post Reply
arsenios
Posts: 3
Joined: Tue Feb 23, 2021 12:16 am

Geeetech Voice Recognition Module

Post by arsenios » Tue Feb 23, 2021 12:31 am

Hello everyone,
I'm a student and currently I'm working on my thesis based on an Arduino Uno R3 and I want to use the Geeetech Voice Recognition Module. I was having some problems, mainly with the sound part, but generally everything seemed to be working. I recoreded some commands and i focused on the coding. The problem is that today, when I connected the module and powered up the Arduino, i sent the 0xAA 0x00 command and I didn't get any response. All the hardware parts seem fine, I checked it many times, as well as the baud rate etc. I also tried other commands, but still I don't get any response at all... Any ideas?

najwayaminah
Posts: 1
Joined: Tue Aug 24, 2021 10:46 pm

Re: Geeetech Voice Recognition Module

Post by najwayaminah » Tue Aug 24, 2021 11:39 pm

Now you're at the best platform where you can get more useful information about your thesis. I am also working on my projects before visiting this platform and getting thesis help online, but now I can get useful information here.

Post Reply