Simple Spool Holder

Post Reply
mediaklan
Posts: 63
Joined: Wed Mar 04, 2015 4:00 pm

Simple Spool Holder

Post by mediaklan » Wed May 06, 2015 9:37 pm

Hi everyone !
I've designed a very simple filament spool holder, based on Z-top mount part (PI3A-M08) of the Geeetech Prusa i3 Pro B. It's actually very simple :
Image
I cloned the part PI3A-M08 with Blender, making it a little taller, and screw the printed part on top of the original, using two M3*30 screws to secure it. Then I put a 15cm threaded rod (6, 7 or 8 mm), a spacer and nuts to hold the spool.
Image
Image
And voilà !
At first, I was afraid the printer would lose some balance, or the threaded rod to bend from the spool weight, but no, it seems to be working just fine :)
STL file in attachment.
Have a nice day !
Attachments
i3a_M08_spool_holder.zip
(49.84 KiB) Downloaded 975 times

soumyaahuja
Posts: 2
Joined: Wed Mar 01, 2017 5:10 pm

Re: Simple Spool Holder

Post by soumyaahuja » Wed Mar 01, 2017 5:14 pm

congrats,,,,

Rupal_Singh
Posts: 1
Joined: Tue Jul 04, 2017 8:44 pm

Re: Simple Spool Holder

Post by Rupal_Singh » Wed Jul 05, 2017 2:02 pm

Great! Nice Job.

emilii
Posts: 1
Joined: Tue Jan 26, 2021 8:00 pm

Re: Simple Spool Holder

Post by emilii » Tue Jan 26, 2021 8:07 pm

Wow! Looks something creative.

JohnSimon
Posts: 4
Joined: Thu Mar 10, 2022 9:40 pm
Location: Calgary, AB, Canada
Contact:

Re: Simple Spool Holder

Post by JohnSimon » Wed Jun 15, 2022 3:06 pm

Good job

Aaron1010
Posts: 1
Joined: Wed Jun 22, 2022 11:39 am

Re: Simple Spool Holder

Post by Aaron1010 » Wed Jun 22, 2022 11:51 am

I am surprised about this post. It has a nice presentation, and clear layout, and the information is meaningful to me. fall guys wordle unlimited

Post Reply