Require full Prusa I3 Aluminium Kit Assembly Instructions

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Wed Feb 11, 2015 2:29 pm

You are welcome. Hope you enjoy your printing later.

Cheung Weng

Anabatix
Posts: 16
Joined: Sat Feb 07, 2015 9:50 am

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by Anabatix » Thu Feb 12, 2015 11:50 am

Hi,
A couple more questions.

1. I think I must cut the white plug off the 12vDC power, strip and screw into board directly? As the photo you show can't be the same board design as in the kit for Ramps 1.4... correct?
2. The 2x Z Axis stepper motors, the white plugs to connect to the Ramps board will never fit. Have you tried it on your Kit. What do you suggest for an easy fix?
3. Could you post some good photos of a completed Prusa Alu Kitset so I can check the layout is as intended. Your manual does not show board or extruder mounting etc. And cable layout around motors.
4. Could you post a Ramps 1.4 finished wiring photo as it is worth 1000 words. And will explain better the power, fan and heatbed wiring using this kitset.

Thanks,

Lee

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:42 am

I will give you the pictures of all the wiring of all the parts. Please, you must understand my pictures because I spent a lot time assembling. If you have any problem, please reply me T_T
Ramp1.4+Mega2560
image1.png
image1.png (319.87 KiB) Viewed 29153 times
image2.png
image2.png (450.45 KiB) Viewed 29153 times
Jumper caps
image3.png
image3.png (596.52 KiB) Viewed 29153 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:45 am

Cooling fan for mainboard
Cooling fan.png
Cooling fan.png (397.42 KiB) Viewed 29154 times
Cooling fan2.png
Cooling fan2.png (524.28 KiB) Viewed 29154 times
Extruder motor
Extruder motor wiring.png
Extruder motor wiring.png (601.39 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:49 am

Themistor on hotbed
Thermistor on hotbed2.png
Thermistor on hotbed2.png (183.19 KiB) Viewed 29154 times
Thermistor on hotbed.png
Thermistor on hotbed.png (806.05 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:52 am

Hotbed
hotbed.png
hotbed.png (373.92 KiB) Viewed 29154 times
hotbed wiring.png
hotbed wiring.png (345.6 KiB) Viewed 29154 times
Wirng of Endstop
wiring of endstop.png
wiring of endstop.png (557.72 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:56 am

Power supply
Attachments
Power supply wiring2.png
Power supply wiring2.png (195.88 KiB) Viewed 29154 times
Power supply wiring.png
Power supply wiring.png (635.95 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:56 am

LCD
LCD.png
LCD.png (493.32 KiB) Viewed 29154 times
LCD wiring.png
LCD wiring.png (569.16 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 9:58 am

Wiring of extruder
Wiring of extruder.png
Wiring of extruder.png (534.37 KiB) Viewed 29154 times
Wiring of thermistor for extruder
Wiring of themistor for Exturder.png
Wiring of themistor for Exturder.png (419.83 KiB) Viewed 29154 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Require full Prusa I3 Aluminium Kit Assembly Instruction

Post by zhangxueyou » Fri Feb 13, 2015 10:00 am

Switch
switch1.png
switch1.png (345.89 KiB) Viewed 29154 times
switch2.png
switch2.png (561.54 KiB) Viewed 29154 times

Post Reply