Repetier-Host setting on ABS print

Post Reply
Linakesh
Posts: 9
Joined: Tue Jun 15, 2021 6:24 am

Repetier-Host setting on ABS print

Post by Linakesh » Mon Oct 04, 2021 11:04 pm

Same as PLA except temperatures.
https://100001.onl/ https://1921681254.mx/
Hotend first 258, then 250 for green, yellow, white, or 245 for gray, red, blue, black
Hotbed first 110 (120 if you can), then 110.

Post Reply