A20T-Power-loss-resume not working

Post Reply
AlexC
Posts: 4
Joined: Tue Feb 09, 2021 2:41 pm

A20T-Power-loss-resume not working

Post by AlexC » Tue Feb 09, 2021 3:12 pm

Updated A20T firmware with BL touch successfully, all function OK except no power-lost resume. The printing cannot resume when power back on every time when lost power or turn off the machine. Need to re-start the file. ( when use SD card to print.)

Is it the Firmware problem or can we use G-code to reactivate the power resume function? Please help.

AlexC
Posts: 4
Joined: Tue Feb 09, 2021 2:41 pm

Re: A20T-Power-loss-resume not working

Post by AlexC » Wed Feb 10, 2021 5:10 pm

Just find out I can use the Marlin G-code to activate Power lost resume print function....

Method as below...
Use Repetier Host connect to A20T through USB. on Manual control page input the Gcode as folloowing ....

M413 S1
M500

Then the power lost resume function will come back. Still need to try in detail. Just see the LCD show resume print and not complete an actual print yet.
will keep updating if there is additional findings.

lipikakapoor1993
Posts: 1
Joined: Wed Feb 10, 2021 7:35 pm

Re: A20T-Power-loss-resume not working

Post by lipikakapoor1993 » Wed Feb 10, 2021 7:40 pm

I can't face this problem. I think google can help me. if you don't mind, want to use Banashankari Escorts service within your budget?

AlexC
Posts: 4
Joined: Tue Feb 09, 2021 2:41 pm

Re: A20T-Power-loss-resume not working

Post by AlexC » Thu Feb 11, 2021 12:46 am

Please do not post unrelated topics and bring reader to un-related links, need administrator attention on the 3rd reply post.

Do not want the technical topic to be used for other purpose.... .

Post Reply