Geeetech I3 Pro C Extruder Problem

[Percy]

hi Guys Please help I am in trouble as usual!
Please look at Photos! First three photos are done with Left Extruder and the rest is the Right Extruder
I am printing the same item and you can see my right hand Extruder has a problem! The bed and the both Extruders are level I have printed or tried to print this simple little item at least 20 times in the last week! I have printed seven on the left extruder with the gold and clear PLA and never a problem!!! You might have to adjust the photos because they are not in the middle!
I have had this printer for six weeks and this is all I have managed to do so far My Little Elephant is not to bad!
Once again Please Help! Regards Percy
[/b]

DSC_0022.jpg (389.71 KiB) Viewed 5908 times

DSC_0023.jpg (239.38 KiB) Viewed 5908 times

DSC_0019.jpg (167.36 KiB) Viewed 5908 times

DSC_0016.jpg (243.52 KiB) Viewed 5908 times

DSC_0015.jpg (312.96 KiB) Viewed 5908 times

DSC_0014.jpg (217.91 KiB) Viewed 5908 times

DSC_0013.jpg (187.62 KiB) Viewed 5908 times

[bang]

So it seems like the extruders worked normally at the beginning(the elephant).
But now it is not working properly,i guess it's the spring on the second extruder has no sufficient force?

[Percy]

No the two white things (Keys) and the elephant are printed with the LEFT EXTRUDER and the other items come of the RIGHT EXTRUDER!
I did say the bed was level and both extruders have been levelled
Any thing I print on the left extruder works
I only get rubbish from the right extruder
Please come back! Thanks Percy