TT2560 V4.0 Dimensions

Post Reply
groswald
Posts: 3
Joined: Sat Aug 22, 2020 12:28 am

TT2560 V4.0 Dimensions

Post by groswald » Sun Dec 27, 2020 10:41 am

Can anyone provide the basic dimensions for the v4.0 GT2560? Specifically, the board's overall perimeter and mounting hole dimensions.

I want to develop an external case. I'd measure the one in my A10, but I just got it dialed back in after adding a direct drive extruder.

Thanks,

Randy

logic128
Posts: 5
Joined: Fri Jan 01, 2021 6:37 am

Re: TT2560 V4.0 Dimensions

Post by logic128 » Fri Jan 01, 2021 6:47 am

will probably be modelling my board in fusion360 later, ill let you know the dimensions if/when i do

quickly measuring the overall dimensions with my callipers its 100.10x130.4
the highest point (hotbed mosfet) is 23.2 including the board itself and the solder point for said mosfet, so this would be the overall height

Post Reply