Motors X and Y don´t move when printing

Post Reply
AJURADOCL
Posts: 0
Joined: Thu Mar 01, 2018 6:08 am

Motors X and Y don´t move when printing

Post by AJURADOCL » Thu Mar 01, 2018 6:29 am

Hi. I has a novate and I has a new Me Creators 2 and I test the motors with Repeiter Host and all ok in the test but when printing the extruder go to Home and printing only in Home location. In repeiter Host Manual Control I see the positión of the extruder painting the model but in the printer the extruder don´t move X and Y location. Only Z Axis.

I don´t know how resolve this and I need help. Thank you.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Motors X and Y don´t move when printing

Post by William » Thu Mar 01, 2018 4:46 pm

Could you upload a video of the issue to the google drive and then attach the link to the post?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

laniorlala
Posts: 1
Joined: Mon Dec 21, 2020 6:00 pm

Re: Motors X and Y don´t move when printing

Post by laniorlala » Mon Dec 21, 2020 6:02 pm

I have researched on it, thanks for your information

Post Reply