No motors moving
No motors moving
I have a Mendel Max 1.5+ running on marlin with a Rambo V1.2. The extruder is heating up and all fuses are fine but none of my motors are moving, that is, (x,y,z and extruder). I have absolutely no idea what could be going on! Please help.
Re: No motors moving
Hi Monica,
Move all axis on a middle position when the machine is power off. and then turn it on, select "Auto Home" from the LCD menu.
Let me know what happen after doing that.
Move all axis on a middle position when the machine is power off. and then turn it on, select "Auto Home" from the LCD menu.
Let me know what happen after doing that.
Re: No motors moving
Thank you for the fast reply . I actually don't have an LCD I use pronterface.
Re: No motors moving
Our pleasure!
Please check all the endstops include their cables. If it doesn't work, show us some photo about your product.
Please check all the endstops include their cables. If it doesn't work, show us some photo about your product.
Re: No motors moving
So I got the motors to work! I had an issue with the firmware! Thank you guys