Control board Extruder Problem

Post Reply
jhddjn
Posts: 2
Joined: Sun Oct 07, 2018 7:29 pm

Control board Extruder Problem

Post by jhddjn » Tue Oct 09, 2018 11:30 pm

The interface of the extruder on control board seems to not working. For, if I link the extruder to the interface of X axis stepper motor it will move. But it won't move if I link the extruder to the interface of extruder on the control board. Thus, it should be the problem of the control board.

I've consulted my friend studying electronic engineer, and he said the interface of extruder is in different direction compared to other interface on the control board, which will highly possibly lead to the problem.

Should I change another control board or is there any other suggestions, please tell me.

jhddjn
Posts: 2
Joined: Sun Oct 07, 2018 7:29 pm

Re: Control board Extruder Problem

Post by jhddjn » Tue Oct 09, 2018 11:33 pm

And it's a I3 Pro W

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Control board Extruder Problem

Post by _kaktus_ » Wed Oct 10, 2018 1:22 am

Hello.
:mrgreen:

Would you like to show a photograph of your controller board :?:
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply