Geeetech

Dear all, I have the issue that I have a enourmous Backlash in Z Axis. I can move the Z-Glider for about 2mm up and down without moving the Stepper. Any ideas how to tighten the Z-Axis?

Thanks For The Great ConTent Sir. I Will also shaer with my Friend & ones again Thanks a lot.
[https://customersurveyz.onl/www-tellgnc-com/]

ChrisH90 wrote: ↑

Fri Oct 30, 2020 2:23 am

Dear all, I have the issue that I have a enourmous Backlash in Z Axis. I can move the Z-Glider for about 2mm up and down without moving the Stepper. Any ideas how to tighten the Z-Axis?
Tellpizzahut

the Z-Axis position on the control. If the difference is more than 0.0002" (0.005 mm), the backlash is too large.

Thanks to this article I can learn more. Expand my knowledge crediblebhand abilities. Actually the article is very real.

It is able to directly process STL files on the control board and show 3D preview of the printing model on the touch screen. It can directly print the model by clicking the quick slicing button.

It supports to transfer stl files via WiFi connection on the Web-control page, monitor status of printing and control printing by wireless remote, WiFi automatic matching, easy to connect.

DP200 uses a 2560x1440 2K HD UV Curing LCD to provide accurate printing with XY axis resolution of 0.00185inches / 0.04
Dual Z-axis linear guides improve the stability of Z axis, contributing to smooth surface and reconstruct more details for the prints.

I prefer this blog because it has much more informative stuff.
Yellowstone Walker Red Plaid Cotton Jacket

Basically coin master is a Viking village game. The main objective of the game is to collect 'Coins as possible. You can do this by spinning the wheel, and if you are lucky, you will win more Coins, or just go on this site to read how to get free coins? free spins for coin master

I can learn more now that I've read this article. Boost my knowledge, credibility, and skills. The article is actually extremely accurate. basketball stars