HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post Reply
Xilence
Posts: 3
Joined: Mon Mar 02, 2020 6:44 pm

HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post by Xilence » Thu Mar 05, 2020 11:02 pm

Hello i Need Help for I need help with the configartion of the a30 pro Printer for the slicer Cura 4.5

Someone can post a Profile please for the correct setting. sorry but I'm here an absolute beginner

Riccardo
Posts: 3
Joined: Mon Mar 23, 2020 2:20 am

Re: HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post by Riccardo » Mon Apr 06, 2020 7:33 pm

Hi, I too would like someone to give us a profile for Cura. I would like to avoid continuing to experiment and print things I like.
Thanks in advance

ricbru
Posts: 7
Joined: Sat May 23, 2020 3:00 am

Re: HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post by ricbru » Wed May 27, 2020 6:44 am

I received this from Judy Yu at Greetech compliments of my GREAT sales rep.. My start and end GCode is the same as my CR 10S pro for now. You can also add the CR 10S Pro, change the bed size from 300-320 and just rename the printer.
A30 PRO Printer CURA 4.6.jpg
A30 PRO Printer CURA 4.6.jpg (70.24 KiB) Viewed 17155 times
A30 Pro EXTRUDER for CURA 4.6.jpg
A30 Pro EXTRUDER for CURA 4.6.jpg (35.72 KiB) Viewed 17155 times

Agoodevans
Posts: 10
Joined: Tue Sep 22, 2020 12:32 pm

Re: HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post by Agoodevans » Thu Oct 01, 2020 4:47 pm

Thanks Ricbru and Judy Yu. Newbie with an A30pro so this is very helpful. Just setting up my first prints through Cura. Test print came out OK, so trying my own designs now. Happy Days! :)

Agoodevans
Posts: 10
Joined: Tue Sep 22, 2020 12:32 pm

Re: HELP Best Slicer Profil Cura 4.5 for A30 PRO

Post by Agoodevans » Mon Nov 23, 2020 9:46 am

Ditto! New machine so this provides a great start. First print was OK but not symmetrical. Printed 50mm cube so hope to adjust.

Post Reply