A30M firmware, Why so hard to update

Post Reply
Dldesper
Posts: 11
Joined: Fri Jun 09, 2017 10:59 am

A30M firmware, Why so hard to update

Post by Dldesper » Wed Jun 23, 2021 10:14 am

I have looked at every forum page, utube, and facebook, cant get my LCD screen to come back on. been using firmware updater program and loading (A30M_M09_V1_04-R.bin) and( (A30M_S02_V1_02-R.bin) . what is a LCD_bootloader_V3.0.hex? and motherboot_booter_V1.0.bin ????? I just want it to work, give me something simple to do please, or easy to understand.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: A30M firmware, Why so hard to update

Post by Admin » Mon Jun 28, 2021 2:43 pm

Hello, if you did follow the video, the screen may be broken and you can replace it directly.

Dldesper
Posts: 11
Joined: Fri Jun 09, 2017 10:59 am

Re: A30M firmware, Why so hard to update

Post by Dldesper » Tue Jun 29, 2021 4:38 am

I followed the utube to the letter but still have a blank screen. I can see the leds on the lcd board blink intermittingly but black screen/.

Fugitive
Posts: 5
Joined: Fri Apr 17, 2020 10:58 am

Re: A30M firmware, Why so hard to update

Post by Fugitive » Mon Aug 02, 2021 7:04 am

I have the same problem

Fugitive
Posts: 5
Joined: Fri Apr 17, 2020 10:58 am

Re: A30M firmware, Why so hard to update

Post by Fugitive » Wed Aug 04, 2021 8:52 am

I got it to work :)

My mainboard has "Smartto MB V1.0" on the back
Firmwaretoolkitv2.0
A30M_V1.01.01

LCD SD Card with
A30M_S02_V1_01.bin
system folder
config.txt (boot:1;LCD:A30M_S02_V1_01.bin;)

Dldesper
Posts: 11
Joined: Fri Jun 09, 2017 10:59 am

Re: A30M firmware, Why so hard to update

Post by Dldesper » Sun Aug 08, 2021 11:03 am

I ended up by a new LCD screen and installed it. It now works. Don’t ask me why, but for some reason the update messes up the LCD screen drivers and can’t get it to come back on. Tried everything……

Bise225
Posts: 2
Joined: Thu Sep 23, 2021 6:16 pm

Re: A30M firmware, Why so hard to update

Post by Bise225 » Thu Sep 23, 2021 6:19 pm

Tracked down your post intriguing to peruse. I cannot hold back to see your post soon. Best of Luck for the impending update. This article is actually quite fascinating and successful.

skylightpaycard

Bise225
Posts: 2
Joined: Thu Sep 23, 2021 6:16 pm

Re: A30M firmware, Why so hard to update

Post by Bise225 » Thu Sep 23, 2021 6:20 pm

Tracked down your post intriguing to peruse. I cannot hold back to see your post soon. Best of Luck for the impending update. This article is actually quite fascinating and successful.

skylightpaycard

pattie008
Posts: 5
Joined: Mon Sep 14, 2020 8:23 pm

Re: A30M firmware, Why so hard to update

Post by pattie008 » Mon Nov 22, 2021 10:51 pm

i update to new firmware but extruder 2 is running on must higher steps then extruder 1 but how do you change that

Post Reply