Anyone have an A20T profile for PrusaSlicer?

Post Reply
Blue_Collar
Posts: 25
Joined: Thu Jun 24, 2021 3:13 am
Location: USA

Anyone have an A20T profile for PrusaSlicer?

Post by Blue_Collar » Tue Aug 10, 2021 7:27 am

Fellow printers,
I finally got the printer working, more or less. I use PrusaSlicer for all my 3D printers. I’m trying to make a profile for the A20T. Does anyone have such a profile that I could use to get going? It’s been a little slow trying to learn g-code...
——————— last update 10-16-21
1). Geeetech i3 pro C with custom x axis, extruder carriage, Noctua fans, PIA magnetic build plate, 3d-touch, Marlin 2.x
2). Geeetech A20T with 3 in 1 out Geeetech extruder (diamond hot end failed), magnetic PIA build plate, dual gear extruder upgrades, Marlin 2.x
3+). Prusa Original MK3s x 2, Mini, MMU2s, Mosaic Palette 2s pro
—using PrusaSlicer, openSCAD

noisedoctor
Posts: 1
Joined: Wed Oct 06, 2021 3:09 pm

Re: Anyone have an A20T profile for PrusaSlicer?

Post by noisedoctor » Fri Oct 08, 2021 2:29 am

did you ever get a profile for Prusa created?

Blue_Collar
Posts: 25
Joined: Thu Jun 24, 2021 3:13 am
Location: USA

Re: Anyone have an A20T profile for PrusaSlicer?

Post by Blue_Collar » Sat Oct 16, 2021 6:54 am

No. I gave up (temporarily, hopefully) on the A20T because the nozzle keeps jamming...
I never did get a working prusaslicer profile set up.
——————— last update 10-16-21
1). Geeetech i3 pro C with custom x axis, extruder carriage, Noctua fans, PIA magnetic build plate, 3d-touch, Marlin 2.x
2). Geeetech A20T with 3 in 1 out Geeetech extruder (diamond hot end failed), magnetic PIA build plate, dual gear extruder upgrades, Marlin 2.x
3+). Prusa Original MK3s x 2, Mini, MMU2s, Mosaic Palette 2s pro
—using PrusaSlicer, openSCAD

aidave
Posts: 8
Joined: Tue Oct 19, 2021 4:36 am

Re: Anyone have an A20T profile for PrusaSlicer?

Post by aidave » Thu Oct 21, 2021 10:54 am

Just copy the start and end GCode from Cura. I don't see what else is a big difference.

Post Reply