Page 1 of 2
How to install MARLIN update?
Posted: Fri Jun 25, 2021 1:05 am
by Blue_Collar
I have the firmware update kit installed on windows. How do I update the Marlin version?
Re: How to install MARLIN update?
Posted: Mon Jun 28, 2021 2:35 pm
by Admin
Hello, please refer to the video below:
https://www.youtube.com/watch?v=HFOvyX0slbs
Just check the updated part of its firmware.
Re: How to install MARLIN update?
Posted: Sun Aug 01, 2021 10:09 am
by Blue_Collar
Maybe I’m confused, but the linked video seems to be about the 3d-touch which I have already gotten working. I wish to update Marlin to 2.0 in hopes of having the menu selective color mixing function to be of some use. Current Marlin version is 1.1.8. How does one update Marlin?
Re: How to install MARLIN update?
Posted: Sat Aug 07, 2021 8:10 am
by Blue_Collar
Never mind... I figured it out. Now I’ve lost 3D Touch. Gone are the days when a company ships a usable product...
Re: How to install MARLIN update?
Posted: Tue Aug 10, 2021 5:08 am
by BreeOge
I have 2.0 marlin installed in my A20T with 3D touch if you need any help I can try.
Re: How to install MARLIN update?
Posted: Tue Aug 10, 2021 5:09 am
by BreeOge
I have 2.0 marlin installed in my A20T with 3D touch if you need any help I can try.
Re: How to install MARLIN update?
Posted: Tue Aug 10, 2021 7:16 am
by Blue_Collar
Thank you so much! I’ve been very frustrated with the A20T, but it is good to know there is someone out there willing to help. I finally got Marlin to install after what seemed like a painfully long time. I have a diamond head on the A20T right now. I’ve got the “basics” to work, now it is a matter of “dailing in all the details. I’m using Prusa Slicer since I am most familiar with it. I’m trying to build a profile for the A20T from scratch... and I have the ugly prints to prove it. Any suggestions would be welcome.
Thank you for your willingness to help, I’m sure there will be more hurdles ahead.
Re: How to install MARLIN update?
Posted: Tue Aug 10, 2021 7:30 am
by BreeOge
If you don't have Marlin 2.0 installed yet, goto
https://github.com/Vertabreak/Vert-Marl ... 0t-testing and Vert keeps an updated version just for A20T. His version has the 3d probe setup, and UBL Mesh. He has most of it dialed in, however you will still need to tweak it to your filament. One good way is if you can use Cura Ultimaker it has an addon that has calibration tools, you can do a temp tower and retraction tower with ease.
Re: How to install MARLIN update?
Posted: Wed Aug 11, 2021 12:22 am
by Blue_Collar
Thanks for the info! I’ll give it a try!
Re: How to install MARLIN update?
Posted: Fri Sep 24, 2021 9:36 pm
by yoyof
bonjour je n'arrive pas a passer a marlin 2 sur mon A20T j'ai toujours un message d'erreur lors de la verification quelqu'un a une solution je ne suis pas expert dans se domaine