A few words for novices.

Locked
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

A few words for novices.

Post by _kaktus_ » Sun Oct 13, 2019 3:06 pm

Hello.
:mrgreen:

The DIY printer series has many different models.
Each of these models has individual features that affect the printer's capabilities.
However, one thing is common: these constructions require certain skills from the owner. :idea:

A person with a passion for DIY, who likes challenges and riddles, will be able to handle the start-up and preparation of a new printer for work more easily.

Of course, this does not mean that if you are a young person and you want to start your amazing adventure you will not be successful.
However, you will have to work more and harder. ;)

So it's worth remembering:

If you own a new printer, keep in mind it has to work.
Due to this, all the mechanisms will be able to adjust.
This will require some patience ...


Precise assembly of mechanisms and the use of quality oil for bearings and linear guides will be helpful. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Locked